Double Propane Burner

Fattdaddy · Newbie Joined: 06 Feb 2010 Posts: 30

I am getting ready to hook up the burners on my cooker and want to run 3/8" copper tubing to them instead of the rubber hoses. I know that I need to keep the orfice in there but need to know how to make the transition from the orfice to the 3/8" tubing.
What is going to be the easiest way to do that. Any pics of the connections would be helpful if you have them.

Thanks
Bill

KMM · Newbie Joined: 01 May 2016 Posts: 47

Bill,

What style/size of connection is currently on the orifice? Without that information, it will be hard to provide you with an accurate answer. Can you post a pic of the oriface?

k.a.m. · Posted: Sun Oct 29 17 11:14 pm Post subject:

Most burners come with 3/8" flared ends on the orifice if this is the case you can get a 3/8" flare to 3/8" NPT then get an adapter to compression.
_________________
Always remember slow and steady wins the race.

Hybrid Cooker

Fattdaddy · Newbie Joined: 06 Feb 2010 Posts: 30

Thanks for the help. I found the pieces I needed.

Bill