View previous topic :: View next topic |
Author |
Message |
Phils67
Joined: 14 Mar 2017 Posts: 20
|
Posted: May 24 2017 Post subject: Where is the bset location for the holes..CC to Warming box? |
|
|
24" x 48" pipe reverse flow offset, with a warming box on top of the fire box.
I want to know where is the best spot for the hole from the CC to the warming chamber to allow smoke in????
Should it be down low, by the first cooking grate, or at the top of the 24" CC???
I will be adding "Vents" to the top of the fire box to allow more heat into the warming box just in case I want to cook ribs...etc.
Phil. |
|
Back to top |
|
 |
k.a.m. BBQ Mega Star

Joined: 12 Dec 2007 Posts: 26020 Location: Southeast Texas.
|
Posted: May 24 2017 Post subject: |
|
|
I would place it down low.this way both chambers can be used at the same time if you choose. If you place it high then the lower grates in the warmer will not benefit from it. _________________ Always remember slow and steady wins the race.
Hybrid Cooker |
|
Back to top |
|
 |
Phils67
Joined: 14 Mar 2017 Posts: 20
|
Posted: May 24 2017 Post subject: |
|
|
Done.......  |
|
Back to top |
|
 |
|