Future Disco...

ecave · Newbie Joined: 20 Sep 2013 Posts: 38 Location: Benson, NC

Finished up the discada today. Still needs seasoning and cook something. My handles are a little long in my opinion. The stand will be a combo stand and burner for the disco like kam and, I think, Denny did.
Comments welcome.
https://www.facebook.com/CapeWelding/photos/pcb.584838651626399/584838214959776/?type=1&theater
https://www.facebook.com/CapeWelding/photos/pcb.584838651626399/584838231626441/?type=1&theater
https://www.facebook.com/CapeWelding/photos/pcb.584838651626399/584838194959778/?type=1&theater
https://www.facebook.com/CapeWelding/photos/pcb.584838651626399/584838198293111/?type=1&theater
https://www.facebook.com/CapeWelding/photos/pcb.584838651626399/584838241626440/?type=1&theater

TrailerBuilder · Posted: Mon Aug 25 14 6:35 pm Post subject:

Disco looks good ecave. Cook on it a few times and see how the handles treat you, you can always cut them off and shorten them a little if need be. Your coming along nicely, look forward to seeing the first cook.
_________________
X2 Finished Build
Disco Time
Fire Pit

ecave · Newbie Joined: 20 Sep 2013 Posts: 38 Location: Benson, NC

Thanks Troy.

k.a.m. · Posted: Tue Aug 26 14 9:50 pm Post subject:

Very nice work on your disco ecave I like it. Very Happy

Looking forward to seeing the first cook. Very Happy

I pre-season all my discos with crisco, moving them around like the video you posted it works well.
Watch out with the paper towel I have had a few ignite on me and wear some leather gloves that grease is hot. Wink

_________________
Always remember slow and steady wins the race.

Hybrid Cooker

ecave · Newbie Joined: 20 Sep 2013 Posts: 38 Location: Benson, NC

Thanks kam