Burner stand for millstream

TrailerBuilder · Posted: Sat Aug 02 14 10:21 pm Post subject: Burner stand for millstream

Kevin hit me up quite a while back about building a stand for millstream. Told him Id be happy to as long as Scott wasn't in a huge rush. Was an extremely busy spring and early summer with trailer builds, so I didn't have a ton of free time.

I had 5 discos and burners sold for people to give as Fathers Day gifts, so I went ahead and got the stand cut and built knowing Scotts build was coming as well.

Kevin had the pieces water jetted since he had the pieces done for the disco and everything was already programmed. When I got the package, this was inside another envelope, which was stuffed inside of another envelope. Kevin had it packed well.

The pieces laid out. The detail work in this is awesome and delicate, so had to be pretty cautious when working on it.

Got the pieces all tacked and squared and then welded and sanded.

The tabs the inner ring will set on and the 1" square tube on the bottom where it will attach to the stand.

Leveled and tacked onto the stand.

Welded in place.

Forming the outer ring.

Im not real sure what happen to the next 2 or 3 pictures in the process, Im kinda thinking my 7 year old helper might have got delete crazy with my photos Rolling Eyes

This is a finished picture of the topside though, the outer ring is rolled and welded, then attached to the inner ring with 2x2 scrap iron.

Sitting outside for a fresh coat of high heat paint and some cure time.

Done and ready to be packaged up.

Boxing it up for shipping.

I always get crazy looks from the Fed Ex lady when I walk in the door with one of these packages
Laughing

It was a cool build, thanks Kevin for being scared to work with tubing and letting me do this one for you Razz

Scott, hope you enjoy it man, and make sure to post some pics Very Happy

_________________
X2 Finished Build
Disco Time
Fire Pit

ecave · Newbie Joined: 20 Sep 2013 Posts: 38 Location: Benson, NC

Yeah...keep FedEx guessing TB.
Very nice work!

Maniac · BBQ Super Pro Joined: 02 Oct 2010 Posts: 2432 Location: Pa

TB That should make Scott very happy Exclamation

Hope he posts a night shot of her burning...should be nice with the big M lighting up.
_________________
RF Smoker
20" disc
uds

k.a.m. · Posted: Sun Aug 03 14 9:42 pm Post subject: Re: Burner stand for millstream

TrailerBuilder · Posted: Mon Aug 04 14 11:30 am Post subject:

ecave, Thank you! You would think after a few shipped discos that the FedEx lady would know by now, but I guess not Laughing

Maniac, Thanks! It should look pretty cool burning at night.

Kevin, Thanks for the kudos brother, and thanks for the all the leg work with the logo. Always a good time sharing the fabrication and build process with you my friend.

TrailerBuilder wrote:

k.a.m. · Posted: Mon Aug 04 14 8:20 pm Post subject:

Wreckless · Posted: Mon Aug 04 14 10:36 pm Post subject:

Dude, that is sharper than Wilkinson Bonded razor blades! Great job, some good minds went together there my friends. Very Happy

jess · Posted: Tue Aug 05 14 3:58 am Post subject:

Beautiful...

erniesshop · Posted: Tue Aug 05 14 11:33 pm Post subject:

Troy, my boy !
That is one of the cleanest burner builds yet !
Keep those wheels a turning , and producing great Build's like this !

ecave · Newbie Joined: 20 Sep 2013 Posts: 38 Location: Benson, NC

Hey TB,

What is the material size and diameter of the inner and outer rings? Thanks.

TrailerBuilder · Posted: Thu Aug 07 14 11:00 am Post subject:

Kevin my friend...you "might" have been a touch baited on that one
Laughing

Thank You Mike, it was a fun build via the phone/text lines.

jess, Thank You Very Happy

Ernie Thanks brother. Good to see you snooping around still now and then Very Happy

ecave, The inner ring is 12" black pipe, the OD on it is 12 3/4". Yep, its overkill from hell, but I have abundance of it. I cut a 2" ring. The outer ring is hand rolled and I normally get them in at around 16" to 16.5". I use the 12" black pipe and vice grips to roll the metal. I use 1.5" x 1/8" flat strap for the outer ring. Hope that helps you out Very Happy

_________________
X2 Finished Build
Disco Time
Fire Pit

ecave · Newbie Joined: 20 Sep 2013 Posts: 38 Location: Benson, NC

Thanks Troy. I am working on a combo burner/stand like the first one Kevin did. I think Denny did one also.
I may do something different later on.

Thanks again.

killswitch505 · Posted: Wed Aug 13 14 11:11 am Post subject:

Awww hell that thing is bitchin
_________________
Club Disco

TrailerBuilder · Posted: Sun Aug 17 14 11:24 pm Post subject:

ecave, your welcome Very Happy

I look forward to seeing your build complete.

Denny, thanks brother Very Happy

_________________
X2 Finished Build
Disco Time
Fire Pit

BBcue-z · BBQ Super Fan Joined: 14 Mar 2012 Posts: 466

Awesome work as usual Troy and Kevin!!
Millstream, you’re going to enjoy this burner a lot!!
Troy made me a similar burner a while back and I love it Smile

It’s the best thing that happened to my Disco Very Happy

Troy may not know this, but I thank him every time I fire this burner Very Happy

TrailerBuilder · Posted: Thu Sep 18 14 5:42 am Post subject:

Hadi, Thank You and thanks for the kind words. You might not know it but I thank you every time you fire that burner because that means another killer meal for me to copy.
_________________
X2 Finished Build
Disco Time
Fire Pit